Special Offers - Other

NEW OEM CRANKCASE BORED FOR 94MM BARRELS, CLEARANCED, AND FULL FLOW

New OEM VW factory crankcase, machined for 94mm barrels + spot faced, clearanced for 82mm crankshaft and drilled and tapped for full flow oil system, fitted with 8mm case savers.

£699 + vat

TYPE 1 HEAVY DUTY FLYWHEEL SEAL

A Type 1 heavy duty flywheel seal unlike any other, this seal is a dual compound construction of rubber and bakerlite, features a dual lip seal to the flywheel. These fit nice and tight into the case.

£15 + vat

HEAVY DUTY GENUINE VW MOUNTS

Originally made for the trecker and type 2 for rough terrain countries, genuine VW manufactured parts, these are the best for strength and durability. Unlike urethane rubber has a memory so retains its shape and is much quieter in use + absorbs shocks without cracking or distorting.

Pair £18 + vat

STATESIDE TUNING MAGNUM STYLE CYLINDER HEADS

Stateside Tuning Magnum style cylinder heads with 37.5mm intake valves and x 33mm exhaust valves, with best quality stainless steel valves for use on smaller and torque engines that use the original heat exchangers. 12mm long reach relocated spark plugs for extra strength and less prone to cracks, hardend valve seats with 3 angle serdi machined valve job, ported valve seats to chambers, diamond honed valve guides, stateside special single h-duty valve springs, cromoly valve retainers, precision ground clearanced valve collets. All valve heights are checked and corrected as required, vacuum tested valve to seat contact faces.

Standard 80.5mm – Pair £465.00 + VAT
Bored for 90.50 / 92mm - Pair £499.00 + vat

Note: We can offer this cylinder head with larger chamber volumes 62cc
It is also available with 40 x 35.50 valve sizes + options for porting & polishing.

OEM VW GERMANY 200mm STEEL FLYWHEELS

Original VW flywheels which are thoroughly check before being reconditioned. Reconditioning includes precision grounding the clutch disc and pressure plate mount face, ground ring gear face. These are then chemically cleaned and ready to fit. Forget the import flywheels, most of these do not run straight as they do not sit correctly on the crankshaft.

Std weight with 4 dowel £99.00 + vat
Std weight with 8 dowel £109.00 + vat
Lightend and 8 dowel £129.00 + vat

Also available: Type 2 215mm flywheel and Type 4 flywheels (210mm 215mm 228mm)

200mm FORGED STEEL TYPE 4 FLYWHEEL

Available as standard, or lightened, these flywheels accept type 1 clutch covers and discs so are the best choice for any performance type 4 engine. Each flywheel is checked for run out and correct crankshaft fitment.

Standard weight 139.00 + vat
Lightend 149.00 + vat
Fitted with main shaft support bush add £12.00 + vat

GERMAN OEM VW GLAND NUT AND WASHER

36mm standard best quality gland nut and spread washer, made in Germany, fits all Type 1 and Type 2 engines.

£21.50 + vat

BILLET FUEL PUMP BLOCK OFFS & DISTRIBUTOR CLAMPS

Fuel blocks are tapped NPT 3/8 thread with a side entry, available in silver, blue and red. £22.00 + vat

Best quality aluminium clamps with etched timing marks for easy reference, these tighten up correctly so no more loose distributors, available in red, blue and silver. £22.00 + vat

3.5PSI ROTARY ELECTRONIC FUEL PUMP

Kit includes special micron aluminum fuel filter, clamping bracket and hardware. Pump runs quiet unlike the square facet type. Pump is a push type and should be fitted close to the fuel tank.

£59.90 + vat

MSD IGNITION PACKAGE

Kit includes MSD billet distributor, new style digital MSD 6al control box and MSD blaster 2 red ignition coil, supplied with Taylor spiro core ignition lead set in black

£575.00+vat

TAYLOR SPIRO CORE HIGH QUALITY IGNITION LEADS

8mm wires in black, blue, red & yellow. Supplied with cut to length extra long coil lead for custom applications. Will fit all Type 1,2,3.4 & Porsche 914 engines.

Full set £24.00 + vat