Email: info@statesidetuning.co.uk- All prices are plus VAT at 20% -
Crankshafts
| 66mm reconditioned | call |
| 71mm reconditioned | call |
| 74mm counter weighted ground 10 x std 2.0ltr rod journals | call |
| 78.40 counter weighted gnd 10 x std 2.0ltr rod jnl | call |
| 82mm counter weighted choice of rod jnl | call |
| 78mm import 1 piece new crankshaft, fully checked by Stateside + oil hole modifications and micro polished | call |
NOTE – Crankshafts can be supplied with various rod journals, 5 dowel flywheel fixing for Type 4 engines.
CRANKSHAFT ANCILLARY PARTS
| C gear clip OEM VW | call |
| Brass distributor gear OEM VW | call |
| Gear spacer OEM VW | call |
| Type 4 gear large woodruff key | call |
| Type 4 fan hub woodruff key | call |
| Type 4 steel gear German reconditioned | call |
| Type 4 gear spacer OEM VW | call |
| Type 4 rear spigot bearing | call |
| Type 4 oilite centre flywheel bush | call |
| Type 4 flywheel bolt oem Porsche 914 set of 5 | call |
| Type 4 flywheel bolt lock support washer, 5 hole | call |
| Clutch bolt with wave washer 7mm/11mm head used on 215 flywheels | £6.50 per set |
| Flywheel Oring seal | £3.25 |
| Flywheel felt seal | £1.45 |
| Flywheel bolt set genuine 914 Porsche longer than VW (used) | £21.00 per set |
| Crank/flywheel spigot bearing oem vw part | £7.00 |
| 7mm/11mm rocker shaft nuts and wavy washers | £5.00 per engine set |
Main Bearings
| Genuine VW Germany factory set. std x std | £109.00 |
| std x std steel backed | £69.00 |
| std x 0.25 steel backed | £69.00 |
| std x 0.50 steel backed | £69.00 |
| std x 0.75 steel backed | £79.00 |
| 0.50 x std ally backed | £69.00 |
| 0.50 x 0.25 ally backed | £69.00 |
| 0.50 x std steel backed OEM old style mahle | £139.00 |
| 0.50 x 0.25 steel backed OEM old style mahle | £139.00 |
| 0.50 x 0.50 steel backed old style OEM mahle | £139.00 |
| 1.00 x std steel backed | POA |
| 1.00 x 0.25 steel backed | POA |
NOTE oversize main bearings are available with standard flange and 1mm